Universal Products

🛠️ 4.00" to 5.00" Exhaust Reducer – 6.00" Length | Aluminized Steel This 4.00" to 5.00" Exhaust Reducer is designed to connect mismatched pipe sizes in custom exhaust or turbo piping setups. Whether you're adapting a 4" downpipe to a 5" exhaust system or building a transition...

  🔩 Heavy-Duty T-Bolt Band Clamps – 300 Series Stainless Steel for High-Boost Diesel & Industrial Applications Stainless Diesel T-Bolt Band Clamps are engineered for secure, leak-proof connections in demanding industrial and diesel performance environments. Constructed from 300 series stainless steel, these clamps provide...

🛠️ Stainless Steel Pre-Formed Exhaust Clamp – Simple, Secure Pipe Connection Looking for a fast, reliable way to connect exhaust pipes without the hassle of cutting or separating components? Our Stainless Steel Pre-Formed Exhaust Clamp is the smart solution for joining exhaust system sections with a tight,...

🛠️ 2-Piece Cold Pipe Fabrication Kit – 3.50" | O-Ring Sealed | Optional Coating & Clamp This 2-Piece Cold Pipe Kit is designed for performance turbo builds that require precision fitment during fabrication. Engineered as a modular two-piece assembly, it allows easier alignment and clocking during install—making...

🔥 3.50" to 4.00" Silicone Reducer Boot – 4.00" Long, 5-Ply Reinforced for Diesel Boost Applications This premium 3.50" ID to 4.00" ID silicone reducer boot is engineered for high-boost diesel and performance applications where durability, flexibility, and a leak-free seal are critical. At...

🛠️ -4 AN Male to 1/8" NPT Male Adapter Fitting – Precision Fluid & Turbo Line Connector Easily connect -4 AN braided lines to 1/8" NPT ports with this high-quality -4 AN to 1/8" NPT male adapter fitting. Perfect for turbo oil feed lines, fuel systems,...

🔥 GT55 Exhaust Outlet Flange – 5.125" OD Mild Steel | Fits Garrett GT55 Turbochargers Build your custom downpipe or exhaust system with this precision-cut GT55 exhaust outlet flange. Designed specifically to fit the 5.125" OD outlet of Garrett GT55 frame turbochargers, this flange...

🛠 Stainless Steel Pre-Formed Exhaust Band Clamp – Quick & Leak-Free Connection This pre-formed exhaust band clamp is the simple, effective way to connect exhaust system components without distortion or hassle. Designed to replace bulky U-bolts and traditional saddle clamps, its patented stepped design...

🛠️ 4.00" to 5.00" Exhaust Installation Kit – Stainless Flex + Clamps + Reducer | Ideal for 2G Swaps Make your turbo swap exhaust install quick and hassle-free with this 4.00" to 5.00" Exhaust Installation Kit. Perfect for 2nd Gen turbo swap applications, this kit includes...

  🛠 4.00" Mandrel Bent 90° Pipe – Aluminized Mild Steel (16 Gauge) This high-flow 4.00" mandrel bent 90-degree pipe is perfect for fabricators building custom turbo systems, downpipes, or exhaust components. Made from 16-gauge (.065" wall) aluminized mild steel, it offers durability, easy...

🛠️ Complete Primary Turbo Oil Drain Line Mounting Kit – Compatible with 2G, 3G, 4G Twin Turbo Piping Kits (S300/S400) This complete oil drain line mounting kit is designed specifically for the primary (bottom) turbocharger in your 2nd Gen, 3rd Gen, or 4th Gen Cummins...

🛠️ Twin Turbo Air Intake Pipe – 5.00" Raw | AIT Sensor Port | Pipe Only (Tall) This Stainless Diesel Twin Turbo Air Intake Pipe is built for compound turbo setups requiring a taller intake path. Made with a welded provision for your AIT (Air Intake Temp)...

🔥 3.50" to 5.50" Silicone Reducer Boot – 4.00" Long, 5-Ply High-Temp Reinforced for Diesel Boost Applications This heavy-duty 3.50" ID to 5.50" ID silicone reducer boot is engineered for serious performance. Built from 5-ply reinforced high-temperature silicone, it’s strength-tested to withstand the extreme...

🛠️ -6 AN / JIC Male to 1/4" NPT Male Straight Adapter Fitting – High-Flow Fuel, Oil, or Air Line Connector Easily connect your -6 AN braided hose to a 1/4" NPT port with this -6 JIC Male to 1/4" NPT Male Straight Adapter. Perfect for...

Aluminum Block Drain Fitting with -12 JIC Connection & Double O-Ring Seal This high-quality aluminum block drain fitting is designed with a -12 JIC connection point to ensure efficient and reliable drainage. Equipped with a double O-ring seal, it provides a secure, leak-free connection,...

🛠️ 1/8" NPT Brass Hex Drive Countersunk Plug – EGT Port Block-Off for Stainless Diesel Manifolds Seal unused EGT ports cleanly and securely with this 1/8" NPT Brass Hex Drive Countersunk Plug. Specifically designed for use with Stainless Diesel exhaust manifolds, this plug is the go-to solution...

🛠️ Replacement O-Ring for Aluminum Press-In Block Fitting This high-temp Replacement O-Ring is designed specifically to fit our aluminum press-in block fittings, ensuring a tight, leak-free seal in your engine's cooling or oil system. Whether you're reinstalling your fitting or replacing a worn-out seal, this O-ring restores proper...

🛠 3.00" Raw Aluminized Fabrication Pipe – Turbo Cover Hose Outlet This 3.00" raw aluminized steel pipe is built for custom turbocharger plumbing, designed to connect S300 or S400 turbo covers to your intercooler system. Ideal for fabricators and builders, this straight pipe fits...

🛠️ Universal Boost Leak Tester Kit – Fits Most Turbocharger Inlets | Billet Plug, Silicone Coupler & T-Bolt Clamps Boost leaks rob your turbocharged engine of power, response, and efficiency. The best way to find them? Pressurize the entire intake system—and our Boost Leak...

🔧 Universal Boost Leak Tester Kit – Billet Plug, Silicone Coupler & T-Bolt Clamps | Turbo Inlet Pressure Test Tool Eliminate hidden performance loss and increase power by tracking down boost leaks the right way. Our Universal Boost Leak Tester Kit is the most...

🔧 Boost Leak Tester Kit – Universal Turbo Inlet Tool with Billet Plug, Silicone Boot & T-Bolt Clamps Ensure your turbocharged system is running at peak performance with our Boost Leak Tester Kit. The best way to detect boost leaks is by pressurizing the...

🔩 Heavy-Duty T-Bolt Band Clamps – 300 Series Stainless Steel for High-Boost Diesel & Industrial Applications Stainless Diesel T-Bolt Band Clamps are engineered for secure, leak-proof connections in demanding industrial and diesel performance environments. Constructed from 300 series stainless steel, these clamps provide superior...

Our CNC machined T4 turbo spacers are designed to help in gaining clearance between the turbo and manifold or pedestal depending on application Key Features: - With the included 3/8” fine thread ARP studs and 12 point nuts you can rest assured that you...

🛠️ -8 AN / JIC Male to 1/2" NPT Male Straight Adapter Fitting – High-Flow Fuel, Oil, or Coolant Line Connector Connect your -8 AN braided hose to a 1/2" NPT port with this -8 JIC Male to 1/2" NPT Male Straight Adapter. Built for high-flow...

🛠️ Turbo Oil Feed Fitting – -6 JIC to M12 O-Ring Seal Adapter for High-Flow Applications Upgrade your turbo oil system with this -6 JIC to M12 O-Ring Turbo Oil Feed Fitting—engineered for high-flow oil delivery to performance turbochargers. This adapter is ideal for setups using...