Universal Products

🛠️ -4 AN Male to 90° Female NPT Elbow Fitting – Turbo Oil Feed Line Adapter This -4 AN Male to 90-Degree Female NPT Fitting is the perfect solution for tight clearances and clean routing in turbo oil feed systems. Commonly used with -4 braided oil feed lines,...

🔩 OEM Oil Feed Line to Borg Warner Turbo Adapter Fitting – 1999–2007 Dodge Cummins to Box Unit S300/S400 Easily connect your OEM oil feed line to a BorgWarner “box unit” turbo with this high-quality adapter fitting. Designed specifically for 1999–2007 Dodge Cummins engines,...

🔩 Turbo Oil Feed Fitting – -6AN (JIC) to M12 O-Ring | High-Flow Turbo Oil Line Adapter This -6AN (JIC) to M12 O-Ring Turbo Oil Feed Fitting is designed for high-performance applications requiring greater oil flow to the turbocharger. Ideal for use with upgraded...

🛠️ Cummins S300/S400 Turbo Installation Kit – Complete Fitment Kit for T4 Borg Warner Turbos This S300/S400 Turbo Installation Kit is a complete bolt-on hardware solution for installing a Borg Warner S300 or S400 turbo onto your Cummins engine. Whether you're upgrading your turbo or doing a...

🛠️ 1/4" NPT Brass Hex Drive Countersunk Plug – EGT Port Block-Off for Stainless Diesel Manifolds Seal unused EGT ports cleanly and securely with this ¼" NPT Brass Hex Drive Countersunk Plug. Designed specifically for use with Stainless Diesel exhaust manifolds, this plug is the perfect solution...

🛠️ 1/2" NPT Brass Hex Drive Countersunk Plug – Recessed Pipe Fitting for Clean Sealing Seal your fittings with strength and precision using this 1/2" NPT Brass Countersunk Hex Drive Plug. Designed with a flush-fit profile and recessed Allen/hex head, this plug provides a clean, low-profile...

🔥 Stainless Diesel T3 External Wastegate Gate Plate – Manifold-to-Turbo Spacer for T3 Flange Turbochargers Build your external wastegate setup the right way with the Stainless Diesel T3 Gate Plate. This heavy-duty gate plate mounts between your T3 manifold and turbocharger, allowing you to...

🔍 Universal Turbo Boost Leak Tester Kit – Billet Plug, Silicone Boot & T-Bolt Clamps Stop chasing down boost leaks the hard way—pressurize your entire intake system and locate leaks quickly with our Universal Boost Leak Tester Kit. Designed to fit virtually any turbocharger inlet,...

When installing a bottom sump with your AirDog or Fass Pump most trucks end up with an open fuel supply and or return line. Our 1/2", 3/8" or 5/16" aluminum plug will cap off these lines with ease, to keep fuel from seeping out...

🚀 Turbo Screen Guard with Velocity Stack – High-Flow Protection in Style Protect your turbo without sacrificing performance. Our Turbo Screen Guard with integrated Velocity Stack is engineered for maximum airflow while offering protection from large debris. Built for high-performance turbo and supercharger setups, this...

🛠️ S500 Exhaust Outlet Flange – 5.125" OD Mild Steel | Fits Borg Warner S500 T6 Turbos | Optional Clamp This  S500 Exhaust Outlet Flange is specifically designed to fit the turbine outlet of Borg Warner S500 T6 turbochargers. CNC-machined from durable mild steel, this weld-on flange...

🛠️ HX82 Exhaust Outlet Flange – 5.125" OD Mild Steel | Optional V-Band Clamp This HX82 Exhaust Outlet Flange is specifically designed to fit the turbine outlet of Holset HX-82 turbochargers. Precision CNC-machined from durable mild steel, this weld-on flange is perfect for custom downpipe fabrication in...

🛠️ Brass 5/8" Barb to 3/4" NPT Male Fitting – Replacement for Water Bypass Kits This Brass 5/8" Barb to 3/4" NPT Male Adapter is a direct replacement fitting used in our Water Bypass Kits. Designed to connect 5/8" coolant hose to 3/4" NPT threaded ports, this...

🛠️ 4" x 18" Flexible Exhaust Tube – Pre-Cut | Stainless Steel This 4" Diameter x 18" Length Flexible Exhaust Tube is a pre-cut stainless steel section designed to provide vibration isolation, thermal expansion relief, and easier routing in custom exhaust systems. Ideal for diesel performance builds,...

🔩 Heavy-Duty T-Bolt Band Clamps – 300 Series Stainless Steel for High-Boost Diesel & Industrial Applications Stainless Diesel T-Bolt Band Clamps are engineered for secure, leak-proof connections in demanding industrial and diesel performance environments. Constructed from 300 series stainless steel, these clamps provide superior...

Part # GRD00226 Key Features: Compatible with: Engine & Engine Parts

Part # GRD661027 Key Features: Compatible with: Duramax, Engine & Engine Parts

Key Features: Compatible with: 1/2" CP3 Fitting, Cummins, Duramax, Fuel Systems, Powerstroke, Universal

🛠️ -6 AN Male to 90° Female NPT Fitting – High-Flow Elbow for Turbo Oil Feed Lines This -6 AN Male to 90° Female NPT Adapter Fitting is a compact, high-flow solution for routing turbo oil feed lines in tight engine bays. Commonly used on -6AN turbo...

🔥 Cummins S300/S400 Turbo Installation Kit – For T4 Flange Turbos (Borg Warner) This all-in-one installation kit includes the essential hardware and fittings needed to install a Borg Warner S300 or S400 turbocharger onto your 5.9L or 6.7L Cummins engine with a T4 mount....

🛠️ 3/4" Brass 90° Street Elbow – Male NPT x Female NPT Pipe Fitting This 3/4" Brass Street Elbow features a 90-degree bend with male NPT x female NPT connections, perfect for redirecting flow in tight spaces. Commonly used in cooling systems, fuel lines, air systems, and industrial...