Pre-Order
Model: -4SOFL
Complete with all inlet/ outlet fittingsDash 4 High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 Oring fittings1 - 1/4" NPT fitting1 - 1/8" NPT fitting..
$70.00
Model: -6TOFL
Complete with all inlet/ outlet fittingsDash 6 Extreme Duty High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 Oring fittings1 - 1/4" NPT fitting1 - 1/8" NPT fitting..
$125.00
Model: TODG-bolts
Turbo oil drain 'bolts & gasket' set. Borg Warner turbos uses these in both there S300 and S400 turbo sizes.3/8-16 bolts (2 pc.)M8 x 1.5 bolts (2 pc.)Oil Drain Gasket..
$11.99
Model: 4JIC_M12OR
Turbo Oil Feed Fitting
-4 JIC to M12 O-ring
Fits holset turbo inlet size & cummins oil filter head outlets
5.9 & 6.7 cummins
Aluminum with o-ring seal (for use with 3/4" hose)
Also may be used as an oil inlet fitting on most 300 turbos and as an alternate oil supply c..
$16.59
Model: TODL-24
24" Stainless steel flexible oil drain line with dual o-ring block fitting.
For use with 5.9 and 6.7 Cummins diesel engines.
When used as twin turbo oil return for 2nd Gen. (94-02) trucks this line plugs into the factory 90* fitting and hose.
When used on 3rd. Gen. trucks (03-12) ..
$70.00
Brand: Stainless Diesel
Model: VELHS-18
Silver, Velcro sewn, heat shield.sold in 18.00" pre-cut piecesVelcro lined for easy installation for protecting wiring harness from the heat of turbosSilver Velcro Heat ShieldSilver Kevlar Lined Sleeve made of aluminum and kevlar. Provides continuous temperature protection to 500°F and short-t..
$14.95
Out Of Stock
Model: TTODL-formed
3/4" Preformed Oil drain line for the primary turbocharger (bottom turbo) in any 2G, 3G, 4G piping kit.optional bolt / gasket kit (standard sizing bolts for all S3 / S4 Borg Warner turbochargers)..
$75.00
Model: S3/S4 TIK
CUMMINS Borg Warner S300/S400 Turbo Installation Kit
22in oil drain line
T-4 gasket
oil drain gasket
M-8 oil drain bolts
3/8 - 16 oil drain bolts
-6 to 1/4npt oil feed fitting, for stock common rail and 24v oil feed lines
Short manifold to turbo stud..
$159.00
Out Of Stock
Model: TTODL-formed-kit
Complete mounting kit -
Oil drain line for the primary turbocharger (bottom turbo) in any 2G, 3G, 4G piping kit.
paper gasket4 bolts (2pc. 3/8 16) (2pc. m8 x 1.5) standard sizing used by Borg Warner for all S3 / S4 turbochargersoil drain plugsmall portion of 3/4" drain hose..
$129.00
Model: 4-1.8NPT
-4 male to 1/8" NPT male, fitting, adapter..
$3.77
Model: 4_1.4NPT
-4 male to 1/4" NPT male, fitting, adapter..
$3.97