~6 to 90 degree NPT fitting M/F
Model: 6-90*M/F
We are now offering a standard 2-Year warranty on our 5Blade Cummins VGT turbos so if you have purchased one after April 1st this year please fill out the "2-Year Actuator Warranty Registration Form" found at the bottom of our website under the "Customer Support" section in order to register your turbo for a 2 year warranty.
~6 to 90 degree NPT fitting M/F
Complete with all inlet/ outlet fittingsDash 6 Extreme Duty High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 O..
$125.00
Turbo Oil Feed Fitting
-6 JIC to M12 O-ring
used for higher oil flow lines..
$16.59
Complete with all inlet/ outlet fittingsDash 6 Extreme Duty High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 O..
$125.00
-6 JIC male to 1/4" NPT Male Straight fitting..
$8.84
3.00" ID - 3.00" ID x 4.00" length STRAIGHT high temperature silicone HUMP BOOT..
$23.99
Turbo Oil Feed Fitting
-6 JIC to M12 O-ring
used for higher oil flow lines..
$16.59
Complete with all inlet/ outlet fittingsDash 6 Extreme Duty High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 O..
$125.00
-6 JIC male to 1/4" NPT Male Straight fitting..
$8.84
3.00" ID - 3.00" ID x 4.00" length STRAIGHT high temperature silicone HUMP BOOT..
$23.99
Turbo Oil Feed Fitting
-6 JIC to M12 O-ring
used for higher oil flow lines..
$16.59
Complete with all inlet/ outlet fittingsDash 6 Extreme Duty High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 O..
$125.00
-6 JIC male to 1/4" NPT Male Straight fitting..
$8.84
3.00" ID - 3.00" ID x 4.00" length STRAIGHT high temperature silicone HUMP BOOT..
$23.99
Complete with all inlet/ outlet fittingsDash 4 High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 Oring fittings..
$70.00
Complete with all inlet/ outlet fittingsDash 6 Extreme Duty High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 O..
$125.00
Turbo oil drain 'bolts & gasket' set. Borg Warner turbos uses these in both there S300 and S400 turbo sizes.3/8-16 bolts (2 pc.)M8 x 1..
$11.99
Turbo Oil Feed Fitting
-4 JIC to M12 O-ring
Fits holset turbo inlet size & cummins oil filter head outlets
5.9 & 6.7 cummins
..
$16.59
24" Stainless steel flexible oil drain line with dual o-ring block fitting.
For use with 5.9 and 6.7 Cummins diesel engines.
When used as..
$70.00
Complete with all inlet/ outlet fittingsDash 4 High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 Oring fittings..
$70.00
Complete with all inlet/ outlet fittingsDash 6 Extreme Duty High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 O..
$125.00
Turbo oil drain 'bolts & gasket' set. Borg Warner turbos uses these in both there S300 and S400 turbo sizes.3/8-16 bolts (2 pc.)M8 x 1..
$11.99
Turbo Oil Feed Fitting
-4 JIC to M12 O-ring
Fits holset turbo inlet size & cummins oil filter head outlets
5.9 & 6.7 cummins
..
$16.59
24" Stainless steel flexible oil drain line with dual o-ring block fitting.
For use with 5.9 and 6.7 Cummins diesel engines.
When used as..
$70.00
Complete with all inlet/ outlet fittingsDash 4 High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 Oring fittings..
$70.00
Complete with all inlet/ outlet fittingsDash 6 Extreme Duty High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 O..
$125.00
Turbo oil drain 'bolts & gasket' set. Borg Warner turbos uses these in both there S300 and S400 turbo sizes.3/8-16 bolts (2 pc.)M8 x 1..
$11.99
Turbo Oil Feed Fitting
-4 JIC to M12 O-ring
Fits holset turbo inlet size & cummins oil filter head outlets
5.9 & 6.7 cummins
..
$16.59
24" Stainless steel flexible oil drain line with dual o-ring block fitting.
For use with 5.9 and 6.7 Cummins diesel engines.
When used as..
$70.00