T6 exhaust to bearing cartridge clamp
Model: VBT6EHBC
$54.00
Price in reward points: 1080
We are now offering a standard 2-Year warranty on our 5Blade Cummins VGT turbos so if you have purchased one after April 1st this year please fill out the "2-Year Actuator Warranty Registration Form" found at the bottom of our website under the "Customer Support" section in order to register your turbo for a 2 year warranty.
T6 exhaust to bearing cartridge clamp
3rd Gen HE351 Flange
Used on 3rd Gen S300's 4 3/8th's OD For use with 4" Downpipes 3.50" pipe will fit on the inside of the flange Mild st..
$59.00
Formed Steel Exhaust Outlet Flange for Borg Warner S400 and K31 turbo charger.
5" outlet 5" V Band Clamp.
This clamp is commly used with o..
$32.00
3rd Gen HE351 Flange
Used on 3rd Gen S300's 4 3/8th's OD For use with 4" Downpipes 3.50" pipe will fit on the inside of the flange Mild st..
$59.00
Formed Steel Exhaust Outlet Flange for Borg Warner S400 and K31 turbo charger.
5" outlet 5" V Band Clamp.
This clamp is commly used with o..
$32.00
3rd Gen HE351 Flange
Used on 3rd Gen S300's 4 3/8th's OD For use with 4" Downpipes 3.50" pipe will fit on the inside of the flange Mild st..
$59.00
Formed Steel Exhaust Outlet Flange for Borg Warner S400 and K31 turbo charger.
5" outlet 5" V Band Clamp.
This clamp is commly used with o..
$32.00
Turbo Oil Feed Fitting
-6 JIC to M12 O-ring
used for higher oil flow lines..
$16.59
In Stock
*Special 5.00" length sized* 5.00" ID to 5.50" ID x 5.00" long, high temperature, 5 ply reducer boot. Strength tested to handle diesel boost..
$38.99
3.00" ID - 3.00" ID x 4.00" length STRAIGHT high temperature silicone HUMP BOOT..
$23.99
3.50" ID to 3.50" ID x 4.00" long, high temperature, 5-ply straight boot. Strength tested to handle diesel boost..
$21.99
This clamp holds the compressor cover on a S400 turbo to the back plate on the bearing housing...
$62.00
Turbo Oil Feed Fitting
-6 JIC to M12 O-ring
used for higher oil flow lines..
$16.59
In Stock
*Special 5.00" length sized* 5.00" ID to 5.50" ID x 5.00" long, high temperature, 5 ply reducer boot. Strength tested to handle diesel boost..
$38.99
3.00" ID - 3.00" ID x 4.00" length STRAIGHT high temperature silicone HUMP BOOT..
$23.99
3.50" ID to 3.50" ID x 4.00" long, high temperature, 5-ply straight boot. Strength tested to handle diesel boost..
$21.99
This clamp holds the compressor cover on a S400 turbo to the back plate on the bearing housing...
$62.00
Turbo Oil Feed Fitting
-6 JIC to M12 O-ring
used for higher oil flow lines..
$16.59
In Stock
*Special 5.00" length sized* 5.00" ID to 5.50" ID x 5.00" long, high temperature, 5 ply reducer boot. Strength tested to handle diesel boost..
$38.99
3.00" ID - 3.00" ID x 4.00" length STRAIGHT high temperature silicone HUMP BOOT..
$23.99
3.50" ID to 3.50" ID x 4.00" long, high temperature, 5-ply straight boot. Strength tested to handle diesel boost..
$21.99
This clamp holds the compressor cover on a S400 turbo to the back plate on the bearing housing...
$62.00
Complete with all inlet/ outlet fittingsDash 4 High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 Oring fittings..
$70.00
Complete with all inlet/ outlet fittingsDash 6 Extreme Duty High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 O..
$125.00
The sole job of the spring wastegate actuator, is to act as a pressure relief valve that controls the turbocharger boost output. The main parts of the..
$119.00
DESCRIPTION:
The Turbosmart BOV controller is an electronic device which controls the pressure signal to the BOV. It works by detecting a negative v..
$604.95
Turbo oil drain 'bolts & gasket' set. Borg Warner turbos uses these in both there S300 and S400 turbo sizes.3/8-16 bolts (2 pc.)M8 x 1..
$11.99
Complete with all inlet/ outlet fittingsDash 4 High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 Oring fittings..
$70.00
Complete with all inlet/ outlet fittingsDash 6 Extreme Duty High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 O..
$125.00
The sole job of the spring wastegate actuator, is to act as a pressure relief valve that controls the turbocharger boost output. The main parts of the..
$119.00
DESCRIPTION:
The Turbosmart BOV controller is an electronic device which controls the pressure signal to the BOV. It works by detecting a negative v..
$604.95
Turbo oil drain 'bolts & gasket' set. Borg Warner turbos uses these in both there S300 and S400 turbo sizes.3/8-16 bolts (2 pc.)M8 x 1..
$11.99
Complete with all inlet/ outlet fittingsDash 4 High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 Oring fittings..
$70.00
Complete with all inlet/ outlet fittingsDash 6 Extreme Duty High Pressure braided steel line (19.25" length for line only) 2 - 90* fittings2 - M12 O..
$125.00
The sole job of the spring wastegate actuator, is to act as a pressure relief valve that controls the turbocharger boost output. The main parts of the..
$119.00
DESCRIPTION:
The Turbosmart BOV controller is an electronic device which controls the pressure signal to the BOV. It works by detecting a negative v..
$604.95
Turbo oil drain 'bolts & gasket' set. Borg Warner turbos uses these in both there S300 and S400 turbo sizes.3/8-16 bolts (2 pc.)M8 x 1..
$11.99