Piping Kit Parts

CUMMINS Borg Warner S300/S400 Turbo Installation Kit   22in oil drain line T-4 gasket oil drain gasket M-8 oil drain bolts 3/8 - 16 oil drain bolts -6 to 1/4npt oil feed fitting, for stock common rail and 24v oil feed lines Short manifold to turbo stud..

These are the parts we use in our SD twin piping kits... Now available in a Make your own kit!   Includes:  4.00" on 4.00" radius pipe SD CNC T-6 Flange 4.62  - 4 5/8"  Turbo Flange Matching v-band clamp **This is an unwelded make your own kit!***..

4.00" Mandrel Bent 90 degree Pipe 16 Gauge .65 thou thick aluminized mild steel 4.50" Radius on a 4.00" pipe..

2nd Gen Dodge Style Downpipes (1994-2002) 4.00" 1 piece Mild steel Mandrel bent for high flow As used in single turbo applications, WITH stock angle (40*) 2nd gen manifolds ONLY!THIS IS A DIY KIT, YOU WILL NEED TO JIG/ WELD THE FLANGE ON THE PIPE YOURSELF.  We offer many option..

Aluminum 90 degree Elbow - fits a S400 v-band covers & GT42 style cover.  It has a 3.00" hose on one end, v-band connection on the other end.  O-ring Included..

SD T-4 Turbo Blankets isolate the heat produced by your turbocharger with the purpose of reducing turbo lag, cooler air intake temperatures, protecting and prolonging engine components, and giving a boost in horsepower. In keeping the heat of the exhaust gases contained within the hot side of th..

1.00" Thick T4 Divided Spacer Machined from mild steelMounting holes are non-threadedThread size option is M10 x 1.5When Choosing Studs, 4 Threaded vs. 2 open 2 Threaded refers to the manifold NOT the spacer plate. The spacer plate has 4 pass-through holes. Our manifold utilizes 4 threaded mounti..

2nd Gen Dodge Style Downpipes (1994-2002) 4.00" 1 piece 409 Stainless Mandrel bent for high flow As used in single turbo applications, WITH stock angle (40*) 2nd gen manifolds ONLY!THIS IS A DIY KIT, YOU WILL NEED TO JIG/ WELD THE FLANGE ON THE PIPE YOURSELF.  We offer many opt..

Stainless Diesel Single 2G Swap - Air Intake PIPE ONLY (short pipe) Comes with: (1) 5.00" intake pipe only AIT sensor provision (no boot, no filter)********RAW PIPE ONLY..

Stainless Diesel Twin - Air Intake PIPE ONLY (taller pipe) Comes with: (1) 5.00" intake pipe only AIT sensor provision (no boot, no filter)********..

Stainless Diesel's FLOW BOSS™ 2G Swap - Air Intake Kit... this is the Air Intake Kit that we use in our 2G swap kits for common rail 5.9L Dodge Cummins. (2003-2007)  Can be used with S300 / S400 turbos.  Choose the correct turbo boot for your turbo. This is made for a single turbo with a..