Stainless Diesel

S300 Turbo bearing housing to exhaust housing clamp kit.  Hold down kit.2 clamps4 bolts..

Complete Turbo Assembly with 83mm Turbine Wheel – Easy Fix for Your TurboIf you're looking to fix your turbo without the hassle of a full rebuild, our complete turbo assembly is the perfect solution! This assembly is equipped with an 83mm turbine wheel and is designed to easily integrate with your e..

Fits S400 T-4 Exhaust Housing Down Pipe Marmon FLANGE - 4.62 (4 5/8") *ADD A CLAMP IN THE OPTIONS..

    Looking to upgrade your s400 turbo to get the most performance out of it before needing a T6 setup? Look no further. The 93mm turbine wheel is the largest size turbine wheel that you can comfortably fit inside a T4 housing, and it will offer similar performance to the larger ..

Ball bearing SDG55 88m88mm Billet Compressor9 Blade 113x103 G Turbine1.37 Divided exhaust housinglightweight aluminum center section & backing platePolishing optional..

1" Thick T3 Divided Spacer Machined from mild steelMounting holes are non-threadedThread size option is M10 x 1.5 When Choosing Studs, 4 Threaded vs. 2 open 2 Threaded refers to the manifold NOT the spacer plate. The spacer plate has 4 pass-through holes. Our manifold utilizes 4 threaded mou..

2.75" ID to 3.00" ID x 4.00" long, high temperature, 5 ply reducer boot. Strength tested to handle diesel boost..

Stainless Diesel's Twin/Compound Turbo Kits for Dodge Diesels. Our 2nd Gen Dodge Cummins kits fit 12v '94 - '98 & 24v '98-'02. Drastically lower your EGT's with outstanding efficiency and drive-ability. This is the only way to get the best of both worlds -- great spool-up, & a..

These are the parts we use in our SD twin piping kits... Now available in a Make your own kit!   Includes:  4.00" on 4.00" radius pipe SD CNC T-6 Flange 4.62  - 4 5/8"  Turbo Flange Matching v-band clamp **This is an unwelded make your own kit!***..

4.00" Mandrel Bent 90 degree Pipe 16 Gauge .65 thou thick aluminized mild steel 4.50" Radius on a 4.00" pipe..

63/68/.88 open T-4 non-gated 5 Blade turbo This turbo is an excellent balance between power and drivability. Performance street-ability with a faster transient boost to comparable cast wheel size This turbo has made up to 689hp at the tire Good balance between daily driving, medium duty to..

This is a reconditioned dyno test unit that has been given a clean bill of health from our turbo department, there is also no core on this unit!..