Brand: Stainless Diesel
Model: SD5B480.T6
Stainless Diesel Billet 5BladeTurbocharger S480 T-6 (used in twins)
Billet 5 Blade 80mm compressor wheel 96mm turbine wheel 5" High Flow inlet bell V-band compressor outlet 5in .71 AR Race Cover T-6 turbine housing ..
$2,198.00
Brand: Stainless Diesel
Model: BH5_5.5x5RH
*Special 5.00" length sized* 5.00" ID to 5.50" ID x 5.00" long, high temperature, 5 ply reducer boot. Strength tested to handle diesel boost..
$38.99
Brand: Stainless Diesel
Model: FS3OR-053
Aluminum cover side weld Flange and Mild Steel mating flange setS300, Hx40, Hx35, compressor v-band outlet flange
Works with 2.50" & 3.00" pipe
Includes O-ring..
$67.99
Brand: Stainless Diesel
Model: BH3.5_3.5x4SH
3.50" ID to 3.50" ID x 4.00" long, high temperature, 5-ply straight boot. Strength tested to handle diesel boost..
$21.99
Brand: Stainless Diesel
Model: S4F/C - 4.62
S400, GT42, 3x3
4.62 Turbine outlet flange & clamp
Works with 4" pipes
Flange & v-band clamp included..
$91.00
Brand: Stainless Diesel
Model: SD5BGF485.T6
The GodfatherT6 1.32 housing recommended if you're going to run this unit as a big single with a max recommended boost of around 80psi. If you're going to spray more than 1 shot on this turbo 45mm or 50mm waste gates are HIGHLY recommended. Don't even think about spraying this turbo with a T6 1.15 h..
$2,298.00
Pre-Order
Brand: Stainless Diesel
Model: SD5BTD4954IN
If you're looking to take the Oath of joining deep into the 5Blade Mafia, THA DONK is the biggest inductee. Having the largest wheels around this Bad a** unit has proven in competition to split factory blocks at just 70PSI as a single. If you're going to run this unit as a big single with ..
$2,799.00
Brand: Stainless Diesel
Model: BH5_5x4SH
5.00" ID to 5.00" ID x 4.00" long, high temperature, 5 ply straight boot. Strength tested to handle diesel boost..
$21.89
Brand: Stainless Diesel
Model: FT6EXHO_4INP
CNC'd Exhaust Outlet Flange for Borg Warner S400 turbo's with T-6 exhaust housings and K31 turbo charger's.
Include's Clamp
T-6 large 5in outlet to 4in Pipe..
$125.00
Brand: Stainless Diesel
Model: BH3x10.5SH
*Special 10.50" length sized* 3.00" ID to 3.00" ID x 10.50" long, high temperature, 5 ply straight boot. Strength tested to handle diesel boost..
$34.99
Out Of Stock
Brand: Stainless Diesel
Model: E23004
3rd Gen twin intercooler pipe from S-300 top charger to intercooler. (using 3rd gen turbo cover on 5.9 trucks)
This pipe is also used in our single swap kits.
Choose your option of uncoated or Flat Black Texture..
$228.56
Brand: Stainless Diesel
Model: HX82EOF
HX-82 Exhaust outlet flange
Fits HX-82 Exhaust outlet
5.125 INCH OD MILD STEEL FLANGE
Optional Clamp..
$75.00